Veljan Vane Pumps

Product Details:

VT6DCC VT6C VT6CC VT6BB VT6CC VT6CY VTXB2 VTXBB

Product Details:

• Veljan VT* series Vane Pumps are high-performance fixed displacement pin vane design available in Single, Double, Triple and Drive Train configurations. These can be driven by fixed or variable speed prime movers.
• Large Power Range: Veljan Vane Pumps offer a comprehensive range of Single, Double and Triple Vane Pumps in a large variety of flow capacities. Based on the individual maximum operating pressures, the corresponding power range varies. All pumps are lightweight and compact in design, resulting in an exceptional power-to-weight ratio.
• Greater Flow Range: Within the frame size of a pump, greater flow is achieved by increased displacement cam rings. "B" - 15 gpm, "C" - 31 gpm,"D" - 61gpm, "E" - 85 gpm.
• Low Noise level: Reduced noise levels are well within the acceptable limits of the industry. Large size cartridge displacements optimize operation for the lowest noise level in the smallest envelope. Uni-directional cartridge pumps are quieter in operation in comparison to bi-directional cartridge pumps.
• Mounting Flexibility: Flexible and economical installation - inlet and outlet ports can be arranged in different configurations, 4 positions for single pumps, 32 for double pumps and 128 for triple pumps.
• Maximum Speed Ratings: Speeds are influenced by specific gravity, viscosity and suction head. Maximum speed rating: 3600 rpm. Minimum speed rating: 400 rpm for mobile and 600 rpm for industrial applications. For specific speed, flow and pressure ratings of each series, please refer the general characteristics of Vane Pumps.
• Cartridge Design: Veljan Vane Pumps feature pre-assembled cartridge kits which can be easily and quickly replaced without any major disassembly. The displacement of the pump within the same series can be changed by changing the camping or cartridge.
• Higher Pressure: High-pressure capability up to 4650 psi (320 bar).
• High Efficiency: High volumetric efficiency (typically 94%) reduces heat generation, allows low speeds at full pressure and high
• mechanical efficiency (typically 94%) reduces energy consumption. Better efficiency under load increases productivity
• Wider Range of Acceptable Viscosities: Viscosities from 2000 to 10 cst, permit colder starts and hotter running. The balanced design compensates for wear and temperature changes. Optimum operating viscosity of the oil should be between 16 cst (80 SUS) and 40 cst (180 SUS).
• Versatile Applications: Veljan Vane Pumps are used in all industrial and mobile applications of the industry and can be operated with mineral oils as well as fire-resistant fluids.

• Low ripple pressure reduces piping noise and increases the life of other components in the circuit.
• The large variety of options (cam displacement, shaft, postpositions) allows customized installation
• Low speed, low pressure, high viscosity allows application in cold environments with minimum energy consumption and without risk of seizure.
• Campings are dry lubricant coated and suitable for severe duty applications. This special coating helps in lubrication of the cam surface, especially during cold starts as also while in operation. Additionally, this reduces wear which in turn extends the life of the pump.
• Side feed holes reduce internal leakage, help balance internal pressures, improve lubrication and provide a cooling effect.
• Vane loading pins load the vane against the cam ring. Loading is in direct proportion to pump discharge pressure, which minimizes wear and prevents overshoot pressure and vane blow-off.
• The shaft option T (SAE J718c), allows direct drive (at 540 or 1000 RPM) on tractors.
• The double shaft seal (VT6* P) version and drain hole allow direct mounting onto gearboxes.

Product Details:

Product Details:

• Veljan VT* series Vane Pumps are high-performance fixed displacement pin vane design available in Single, Double, Triple and Drive Train configurations. These can be driven by fixed or variable speed prime movers.
• Large Power Range: Veljan Vane Pumps offer a comprehensive range of Single, Double and Triple Vane Pumps in a large variety of flow capacities. Based on the individual maximum operating pressures, the corresponding power range varies. All pumps are lightweight and compact in design, resulting in an exceptional power-to-weight ratio.
• Greater Flow Range: Within the frame size of a pump, greater flow is achieved by increased displacement cam rings. "B" - 15 gpm, "C" - 31 gpm,"D" - 61gpm, "E" - 85 gpm.
• Low Noise level: Reduced noise levels are well within the acceptable limits of the industry. Large size cartridge displacements optimize operation for the lowest noise level in the smallest envelope. Uni-directional cartridge pumps are quieter in operation in comparison to bi-directional cartridge pumps.
• Mounting Flexibility: Flexible and economical installation - inlet and outlet ports can be arranged in different configurations, 4 positions for single pumps, 32 for double pumps and 128 for triple pumps.
• Maximum Speed Ratings: Speeds are influenced by specific gravity, viscosity and suction head. Maximum speed rating: 3600 rpm. Minimum speed rating: 400 rpm for mobile and 600 rpm for industrial applications. For specific speed, flow and pressure ratings of each series, please refer the general characteristics of Vane Pumps.
• Cartridge Design: Veljan Vane Pumps feature pre-assembled cartridge kits which can be easily and quickly replaced without any major disassembly. The displacement of the pump within the same series can be changed by changing the camping or cartridge.
• Higher Pressure: High-pressure capability up to 4650 psi (320 bar).
• High Efficiency: High volumetric efficiency (typically 94%) reduces heat generation, allows low speeds at full pressure and high
• mechanical efficiency (typically 94%) reduces energy consumption. Better efficiency under load increases productivity
• Wider Range of Acceptable Viscosities: Viscosities from 2000 to 10 cst, permit colder starts and hotter running. The balanced design compensates for wear and temperature changes. Optimum operating viscosity of the oil should be between 16 cst (80 SUS) and 40 cst (180 SUS).
• Versatile Applications: Veljan Vane Pumps are used in all industrial and mobile applications of the industry and can be operated with mineral oils as well as fire-resistant fluids.

• Low ripple pressure reduces piping noise and increases the life of other components in the circuit.
• The large variety of options (cam displacement, shaft, postpositions) allows customized installation
• Low speed, low pressure, high viscosity allows application in cold environments with minimum energy consumption and without risk of seizure.
• Campings are dry lubricant coated and suitable for severe duty applications. This special coating helps in lubrication of the cam surface, especially during cold starts as also while in operation. Additionally, this reduces wear which in turn extends the life of the pump.
• Side feed holes reduce internal leakage, help balance internal pressures, improve lubrication and provide a cooling effect.
• Vane loading pins load the vane against the cam ring. Loading is in direct proportion to pump discharge pressure, which minimizes wear and prevents overshoot pressure and vane blow-off.
• The shaft option T (SAE J718c), allows direct drive (at 540 or 1000 RPM) on tractors.
• The double shaft seal (VT6* P) version and drain hole allow direct mounting onto gearboxes.

Product Details:

• Veljan VT* series Vane Pumps are high-performance fixed displacement pin vane design available in Single, Double, Triple and Drive Train configurations. These can be driven by fixed or variable speed prime movers.
• Large Power Range: Veljan Vane Pumps offer a comprehensive range of Single, Double and Triple Vane Pumps in a large variety of flow capacities. Based on the individual maximum operating pressures, the corresponding power range varies. All pumps are lightweight and compact in design, resulting in an exceptional power-to-weight ratio.
• Greater Flow Range: Within the frame size of a pump, greater flow is achieved by increased displacement cam rings. "B" - 15 gpm, "C" - 31 gpm,"D" - 61gpm, "E" - 85 gpm.
• Low Noise level: Reduced noise levels are well within the acceptable limits of the industry. Large size cartridge displacements optimize operation for the lowest noise level in the smallest envelope. Uni-directional cartridge pumps are quieter in operation in comparison to bi-directional cartridge pumps.
• Mounting Flexibility: Flexible and economical installation - inlet and outlet ports can be arranged in different configurations, 4 positions for single pumps, 32 for double pumps and 128 for triple pumps.
• Maximum Speed Ratings: Speeds are influenced by specific gravity, viscosity and suction head. Maximum speed rating: 3600 rpm. Minimum speed rating: 400 rpm for mobile and 600 rpm for industrial applications. For specific speed, flow and pressure ratings of each series, please refer the general characteristics of Vane Pumps.
• Cartridge Design: Veljan Vane Pumps feature pre-assembled cartridge kits which can be easily and quickly replaced without any major disassembly. The displacement of the pump within the same series can be changed by changing the camping or cartridge.
• Higher Pressure: High-pressure capability up to 4650 psi (320 bar).
• High Efficiency: High volumetric efficiency (typically 94%) reduces heat generation, allows low speeds at full pressure and high
• mechanical efficiency (typically 94%) reduces energy consumption. Better efficiency under load increases productivity
• Wider Range of Acceptable Viscosities: Viscosities from 2000 to 10 cst, permit colder starts and hotter running. The balanced design compensates for wear and temperature changes. Optimum operating viscosity of the oil should be between 16 cst (80 SUS) and 40 cst (180 SUS).
• Versatile Applications: Veljan Vane Pumps are used in all industrial and mobile applications of the industry and can be operated with mineral oils as well as fire-resistant fluids.

• Low ripple pressure reduces piping noise and increases the life of other components in the circuit.
• The large variety of options (cam displacement, shaft, postpositions) allows customized installation
• Low speed, low pressure, high viscosity allows application in cold environments with minimum energy consumption and without risk of seizure.
• Campings are dry lubricant coated and suitable for severe duty applications. This special coating helps in lubrication of the cam surface, especially during cold starts as also while in operation. Additionally, this reduces wear which in turn extends the life of the pump.
• Side feed holes reduce internal leakage, help balance internal pressures, improve lubrication and provide a cooling effect.
• Vane loading pins load the vane against the cam ring. Loading is in direct proportion to pump discharge pressure, which minimizes wear and prevents overshoot pressure and vane blow-off.
• The shaft option T (SAE J718c), allows direct drive (at 540 or 1000 RPM) on tractors.
• The double shaft seal (VT6* P) version and drain hole allow direct mounting onto gearboxes.

Product Details:

• Veljan VT* series Vane Pumps are high-performance fixed displacement pin vane design available in Single, Double, Triple and Drive Train configurations. These can be driven by fixed or variable speed prime movers.
• Large Power Range: Veljan Vane Pumps offer a comprehensive range of Single, Double and Triple Vane Pumps in a large variety of flow capacities. Based on the individual maximum operating pressures, the corresponding power range varies. All pumps are lightweight and compact in design, resulting in an exceptional power-to-weight ratio.
• Greater Flow Range: Within the frame size of a pump, greater flow is achieved by increased displacement cam rings. "B" - 15 gpm, "C" - 31 gpm,"D" - 61gpm, "E" - 85 gpm.
• Low Noise level: Reduced noise levels are well within the acceptable limits of the industry. Large size cartridge displacements optimize operation for the lowest noise level in the smallest envelope. Uni-directional cartridge pumps are quieter in operation in comparison to bi-directional cartridge pumps.
• Mounting Flexibility: Flexible and economical installation - inlet and outlet ports can be arranged in different configurations, 4 positions for single pumps, 32 for double pumps and 128 for triple pumps.
• Maximum Speed Ratings: Speeds are influenced by specific gravity, viscosity and suction head. Maximum speed rating: 3600 rpm. Minimum speed rating: 400 rpm for mobile and 600 rpm for industrial applications. For specific speed, flow and pressure ratings of each series, please refer the general characteristics of Vane Pumps.
• Cartridge Design: Veljan Vane Pumps feature pre-assembled cartridge kits which can be easily and quickly replaced without any major disassembly. The displacement of the pump within the same series can be changed by changing the camping or cartridge.
• Higher Pressure: High-pressure capability up to 4650 psi (320 bar).
• High Efficiency: High volumetric efficiency (typically 94%) reduces heat generation, allows low speeds at full pressure and high
• mechanical efficiency (typically 94%) reduces energy consumption. Better efficiency under load increases productivity
• Wider Range of Acceptable Viscosities: Viscosities from 2000 to 10 cst, permit colder starts and hotter running. The balanced design compensates for wear and temperature changes. Optimum operating viscosity of the oil should be between 16 cst (80 SUS) and 40 cst (180 SUS).
• Versatile Applications: Veljan Vane Pumps are used in all industrial and mobile applications of the industry and can be operated with mineral oils as well as fire-resistant fluids.

• Low ripple pressure reduces piping noise and increases the life of other components in the circuit.
• The large variety of options (cam displacement, shaft, postpositions) allows customized installation
• Low speed, low pressure, high viscosity allows application in cold environments with minimum energy consumption and without risk of seizure.
• Campings are dry lubricant coated and suitable for severe duty applications. This special coating helps in lubrication of the cam surface, especially during cold starts as also while in operation. Additionally, this reduces wear which in turn extends the life of the pump.
• Side feed holes reduce internal leakage, help balance internal pressures, improve lubrication and provide a cooling effect.
• Vane loading pins load the vane against the cam ring. Loading is in direct proportion to pump discharge pressure, which minimizes wear and prevents overshoot pressure and vane blow-off.
• The shaft option T (SAE J718c), allows direct drive (at 540 or 1000 RPM) on tractors.
• The double shaft seal (VT6* P) version and drain hole allow direct mounting onto gearboxes.

Product Details:

• Veljan VT* series Vane Pumps are high-performance fixed displacement pin vane design available in Single, Double, Triple and Drive Train configurations. These can be driven by fixed or variable speed prime movers.
• Large Power Range: Veljan Vane Pumps offer a comprehensive range of Single, Double and Triple Vane Pumps in a large variety of flow capacities. Based on the individual maximum operating pressures, the corresponding power range varies. All pumps are lightweight and compact in design, resulting in an exceptional power-to-weight ratio.
• Greater Flow Range: Within the frame size of a pump, greater flow is achieved by increased displacement cam rings. "B" - 15 gpm, "C" - 31 gpm,"D" - 61gpm, "E" - 85 gpm.
• Low Noise level: Reduced noise levels are well within the acceptable limits of the industry. Large size cartridge displacements optimize operation for the lowest noise level in the smallest envelope. Uni-directional cartridge pumps are quieter in operation in comparison to bi-directional cartridge pumps.
• Mounting Flexibility: Flexible and economical installation - inlet and outlet ports can be arranged in different configurations, 4 positions for single pumps, 32 for double pumps and 128 for triple pumps.
• Maximum Speed Ratings: Speeds are influenced by specific gravity, viscosity and suction head. Maximum speed rating: 3600 rpm. Minimum speed rating: 400 rpm for mobile and 600 rpm for industrial applications. For specific speed, flow and pressure ratings of each series, please refer the general characteristics of Vane Pumps.
• Cartridge Design: Veljan Vane Pumps feature pre-assembled cartridge kits which can be easily and quickly replaced without any major disassembly. The displacement of the pump within the same series can be changed by changing the camping or cartridge.
• Higher Pressure: High-pressure capability up to 4650 psi (320 bar).
• High Efficiency: High volumetric efficiency (typically 94%) reduces heat generation, allows low speeds at full pressure and high
• mechanical efficiency (typically 94%) reduces energy consumption. Better efficiency under load increases productivity
• Wider Range of Acceptable Viscosities: Viscosities from 2000 to 10 cst, permit colder starts and hotter running. The balanced design compensates for wear and temperature changes. Optimum operating viscosity of the oil should be between 16 cst (80 SUS) and 40 cst (180 SUS).
• Versatile Applications: Veljan Vane Pumps are used in all industrial and mobile applications of the industry and can be operated with mineral oils as well as fire-resistant fluids.

• Low ripple pressure reduces piping noise and increases the life of other components in the circuit.
• The large variety of options (cam displacement, shaft, postpositions) allows customized installation
• Low speed, low pressure, high viscosity allows application in cold environments with minimum energy consumption and without risk of seizure.
• Campings are dry lubricant coated and suitable for severe duty applications. This special coating helps in lubrication of the cam surface, especially during cold starts as also while in operation. Additionally, this reduces wear which in turn extends the life of the pump.
• Side feed holes reduce internal leakage, help balance internal pressures, improve lubrication and provide a cooling effect.
• Vane loading pins load the vane against the cam ring. Loading is in direct proportion to pump discharge pressure, which minimizes wear and prevents overshoot pressure and vane blow-off.
• The shaft option T (SAE J718c), allows direct drive (at 540 or 1000 RPM) on tractors.
• The double shaft seal (VT6* P) version and drain hole allow direct mounting onto gearboxes.

Product Details: